No image on NVR VGA monitor output even though unit is powered

Check to see if you can still access the NVR via the web browser.

If you can, log in and check the TIME/DATE. If the time/date is showing a 1970 year, reset the time and date back to the correct value and restart the NVR using the official shutdown procedure.

This also applies to NVR not holding its IP address - https://lilin.zendesk.com/entries/24837197-NVR-IP-address-does-not-change-when-changed-in-a-browser

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.