Add a Control4 DS2 Door Station to a LILIN NVR using ONVIF

The attached document below outlines how to add a Control4 DS2 Door Station to a LILIN NVR using ONVIF. Please scroll to the last page of the PDF document for the relevant information.

If you are using an NVR 3 Series or higher it is recommended to also enable the 'Transcode JPEG' option on the NVR as shown in the guide below.

Enable NVR Transcode JPEG option

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.