If you need to zoom or auto focus a Z Series camera from an NVR, follow the steps below.
NVR Web Browser Control
Put the Z Series camera in you would like zoom or auto focus in to full screen and press the zoom in or out or focus buttons on the left hand menu of the NVR web browser.
NVR Local Mouse and Monitor Control
Enter the NVR menu and select 'PTZ'. Within the PTZ menu, select the camera number that the auto focus camera is, then select 'Preset'.
The screen will now change to a view of the camera with a PTZ bar across the bottom. Select either Zoom or Auto Focus and the camera will start the action.
If you do not see the focus icon shown in the images about or your camera does not start to auto focus or zoom, click here.
0 Comments