Copy a LILIN Client configuration to a different PC

If you need to install and configure the LILIN Client on multiple machines, it is recommended to configure the first client machine and then copy the configuration to any other machines requiring the client.

To copy the Client configuration, browse to the folder of the installed LILIN Client. As default its location will be:

C:\Program Files\Merit LILIN\Navigator Client

In the Navigator Client folder you will see a folder called 'users'. Copy this folder on to USB or a network shared drive, you will need to restore this folder on any future client machines.


Next, install the client on any further machines. Ensure the client software is closed and then browse to C:\Program Files\Merit LILIN\Navigator Client and replace the 'users' folder.

Run the client and the configuration should match the original Client configuration.





Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.