NVR7832 wont boot correctly with USB Keyboard Connected

If you have a USB keyboard connected to an NVR7832, you may see the NVR will not boot correctly upon power down / power loss.

If you see the NVR attempt to boot and display the LILIN splash screen, then the monitor goes blank and then re-shows the LILIN Splash screen, please power down the NVR and remove any USB keyboads you have connected to the NVR.

Re-power the NVR and the NVR should now boot correctly.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.