IP Camera Flip and Mirror Feature

Certain installations may require a camera to be mounted in a particular way meaning the camera image could appear upside down when viewed on an NVR or web browser.

Rather than physically adjust the camera module within the camera, various LILIN IP camera's support a flip and mirror function to help overcome this scenario.

To enable the camera's flip and mirror you will need to log in to the camera's web browser. Select 'Setup' on the top right hand side of the live display.

Once in the setup menu select

Advance >> Video / Audio >> Quality Advance

You will see the flip and mirror options under this menu. It is always recommended to activate both flip and mirror on together otherwise the image will appear inverted.


Alternatively if your image is displayed upside down once the camera is fitted you may need to log in to the web browser and disable flip and mirror to return the image back to normal.



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.