Emergency Factory Reset a P5 or Z5 camera

To emergency factory reset a P5 or Z5 camera you will need to locate the factory reset button/reset cable, this button/reset cable is located in different places on different models of camera.

Once the reset button/cable has been located, apply power to the camera and leave the camera for 2 - 3 minutes to boot up and start the web server running within the camera.

Once this time has elapsed, press and hold the reset button or short the reset cable together until you hear an audible click from the camera.

Once an audible click has been heard, release the reset button/break the cable connection and the camera will reboot and come back online with the default IP address of

You should now be able to reconfigure the camera to the required setting.



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.