Add a 2N / DS2 Door Station to a LILIN NVR

The attached document below outlines how to add a Control4 DS2 Door Station to a LILIN NVR using ONVIF. (See bottom of this page for guide Adding a 2N Door Station to a LILIN NVR.pdf)

If you are using an NVR 3 Series or higher it is recommended to also enable the 'Transcode JPEG' option on the NVR as shown in the guide below.

Enable NVR Transcode JPEG option

***Additional Note***

You may need to adjust a setting on the NVR for the channel the DS2 will be added to. Please ensure the RSTP Type is set to RTSP/TCP

RTSP URL: h264_stream



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.