If you need to adjust the zoom or focus level of a Z Series IP camera from the LILINViewer app, simply put the camera in to full screen then tap the 'PTZ' box. This will then overlay PTZ icons over the full screen image.
Pressing the Zoom In or Zoom Out buttons will start the required function and auto focus the camera at the same time.
 |
 |
Pressing the Auto Focus button will adjust the focus without adjusting the zoom level of the camera.
When the camera is auto focusing you will see a red 'AF' symbol on the camera image. This will disappear when the camera has finished its auto focus.
If you are attempting the above actions but your camera is not zooming for focusing, please see the guide here to enable this feature on your NVR.
0 Comments