If you experience an issue with your DHD5xxA series NVR, it is possible to use the latest firmware as a recovery tool.
Simply download the latest firmware from the here.
Once downloaded, extract the zip file. Within the extract zip file you will see the firmware file with the file extension .fw
Simply rename the entire firmware file to recovery.fw and insert the USB stick in to the DHD DVR.
Power the DHD NVR off and then back on again with the USB stick inserted, this will start the recovery process.
Leave the DHD for approximately 10 - 15 minutes and the system will be fully recovered.
After the recovery the DHD NVR will need to be reconfigured from scratch.
0 Comments