Adding a Control4 Chime Doorbell to an NVR

To add a Control4 Chime Doorbell to a LILIN NVR, follow the steps below:


1) Log in to the Chime and set the video resolution to 640x480.

2) Log in to the NVR and add the cameras IP address, username and password to the NVR as normal.

3) Under the NVR's camera menu select 'Assign RTSP URL'

4) Add the following rtsp URL's.

Primary Stream - live.sdp

Secondary Stream - live3.sdp



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.